Network Appliance NS0-173 Certification Exam Dumps with 62 Practice Test Questions
New NS0-173 Exam Dumps with High Passing Rate
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 23
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. SVMs
- B. IPspaces
- C. failover groups
- D. broadcast domains
Answer: B
NEW QUESTION 24
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco Nexus 2000 Series Fabric Extender
- B. Cisco Nexus 3000 Series switches
- C. Cisco UCS Series Fabric Interconnects
- D. Cisco UCS B-Series servers
- E. Cisco Nexus 9000 Series switches
Answer: C,D,E
NEW QUESTION 25
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)
- A. a two-node FAS8200 with a 4 TB NL-SAS HDD
- B. a DS4246 with twenty-four 6 TB NL-SAS HDDs
- C. a DS224C with twenty-four 3.8 TB SSDs
- D. a two-node AFF A200 with a 3.8 TB NSE SSD
Answer: A,C
NEW QUESTION 26
An administrator decides to connect storage directly to UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports that are connected to the storage controller?
- A. uplink port
- B. server port
- C. appliance port
- D. monitor port
Answer: A
NEW QUESTION 27
A customer has a FlexPod Express configuration with a FAS2720 system. The company has opened a new remote location and will purchase a FlexPod Express configuration with a FAS2750 system. The business requires that the data be replicated to the new location.
Which two software applications accomplish this task? (Choose two.)
- A. SnapMirror
- B. SnapRestore
- C. SnapVault
- D. FlexCache
Answer: A,D
Explanation:
FlexClone®: Instant virtual copies with file and volume granularity
SnapMirror®: Integrated data replication technology for simple, efficient, flexible disaster recovery and backup use cases
NEW QUESTION 28
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. EIGRP
- B. vPC
- C. VXLAN
- D. STP
Answer: C
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 29
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 3
- B. LUN 1
Section: (none)
Explanation - C. LUN 0
- D. LUN 2
Answer: C
NEW QUESTION 30
A client has a requirement to set up a FlexPod Datacenter with the NetApp fabric MetroCluster architecture. You want to enable connectivity between the deployments.
In this design, which two components are required to accomplish this task? (Choose two.)
- A. Cisco MDS 9300 switches
- B. Cisco Nexus 9000 switches
- C. Cisco Nexus 7000 switches
- D. Cisco Nexus 3000 switches
Answer: B,C
NEW QUESTION 31
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp EF570
- B. NetApp FAS2700
- C. NetApp AFF A700
- D. NetApp E2800
Answer: B,C
NEW QUESTION 32
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. Cluster mode
- B. Multipath mode
- C. DualWire Management mode
- D. Direct Connect mode
- E. SingleConnect mode
Answer: C,D,E
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 33
Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. IV
- B. II.
- C. I.
- D. III.
Answer: A,D
NEW QUESTION 34
A FlexPod administrator is building a WWN pool for a server that has 33 ports.
In this scenario, what is the smallest size possible for the pool?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 35
A customer with a FlexPod Datacenter design that uses a 4-node FAS8200 for storage wants to add a new workload that requires high performance. The customer needs to nondisruptively move some workloads from the existing FAS system to the new storage.
Which storage system would satisfy the requirements?
- A. E2700
- B. EF570
- C. FAS2700
- D. AFF A300
Answer: B
NEW QUESTION 36
A customer has verified physical connectivity on the FlexPod. However, the LUNs are not available on the Cisco UCS server. To make the LUNs visible to the UCS, the customer must enable a switching feature for zoning.
In this scenario, what should the customer do?
- A. Enable the device connector feature in Cisco UCS Manager.
- B. Enable NPV on all switches.
- C. Enable Spine mode on all the Cisco Nexus 9000 switches.
- D. Enable NPIV on all switches.
Answer: A
NEW QUESTION 37
A customer wants to configure SAN boot for its FlexPod system. The customer must consider the minimum number of FC ports to be configured on each node in the ONTAP storage solution.
In this scenario, what is the minimum number of FC ports that should be configured per storage node?
- A. three
- B. one
- C. two
- D. four
Answer: A
NEW QUESTION 38
Your customer has a FlexPod implementation and wants to use life-cycle management to validate, monitor, and optimize the FlexPod infrastructure.
In this situation, which management tool should your customer use?
- A. NetApp OnCommand Unified Manager
- B. NetApp Converged System Advisor
- C. Cisco UCS Director
- D. Cisco UCS Manager
Answer: C
Explanation:
Cisco UCS Director can be an integral companion for FlexPod because it allows holistic management through centralized automation and orchestration from a single, unified view. When FlexPod and Cisco UCS Director are combined, IT can shift time and focus from managing infrastructure to delivering new service innovation. Used together, FlexPod and Cisco UCS Director deliver:
NEW QUESTION 39
You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)
- A. policies
- B. virtualization support
- C. service profiles
- D. auto discovery
- E. role-based access control
Answer: A,C,E
NEW QUESTION 40
When FCoE is configured in a FlexPod environment, which step is required?
- A. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
- B. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- C. Create a VSAN to support FCoE for the FC uplink.
- D. Create a VSAN within service profiles.
Answer: B
NEW QUESTION 41
You are asked to design a FlexPod solution with a Cisco UCS B-Series chassis. There is no requirement for any Cisco UCS C-Series rack servers. You must ensure that there is a minimum of a 2500 VLAN or VSAN capacity per UCS domain.
In this scenario, which Cisco Fabric Interconnects do you select?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 42
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)
- A. NetApp
- B. Red Hat
- C. Cisco
- D. Microsoft
- E. VMware
Answer: A,B,C
NEW QUESTION 43
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. The vPC auto-recovery feature should be enabled.
- B. Peer keep-alive connectivity between the switches should be established.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. Port channels should be configured for LACP passive mode.
Answer: B,C
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 44
A customer has several existing standalone Cisco UCS C-Series servers that they would like to repurpose and add to their FlexPod Datacenter solution.
Which action should the customer perform on these servers before using UCS Manager?
- A. Reset the CIMC to the factory settings on each server.
- B. Remove the hard disks on each server.
- C. Reboot the CIMC on each server.
- D. Zero-out the FlexFlash cards on each server.
Answer: A
Explanation:
On rare occasions, such as an issue with the current running firmware, troubleshooting a server may require you to reset the CIMC to the factory default. When this happens, all user-configurable settings are reset. This procedure is not part of the normal server maintenance. After you reset the CIMC, you are logged off and must log in again. You may also lose connectivity and may need to reconfigure the network settings.
NEW QUESTION 45
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. three
- B. four
- C. one
- D. two
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 46
......
Get NS0-173 Braindumps & NS0-173 Real Exam Questions: https://freetorrent.actual4test.com/NS0-173_examcollection.html